Subject	head gasket opinions from the experts....
Posted by	puchy on January 09, 2011 at 3:19 PM
	This message has been viewed 226 times.
Message	I was going to use factory head gasket but I'm using 88mm wiseco pistons. I have heard a lot about leak issues with the cometic gaskets. If I could, I would use oem gasket. If I can't, then the cometic I already got. I have heard of people using copper coat gasket seal front and back or in between the layers with success. Have any of you done this or seen it done to help with leak issues? Any recomendations, suggestions, ideas (relevant to the case) will be appreciated. Car will be automatic Street driven with some 1/4 mile race abuse once every blue moon, oem cams and gt600 turbos .
Follow Ups	head gasket opinions from the experts.... - puchy 15:19:57 01/09/11 let me know what you decide to do, i'm in a similar boat - vulcanrush 16:00:57 01/09/11 yes, but I still have my doubts and one of my biggest - puchy 16:16:18 01/09/11 a few knowledgeable people, like aliaz said stock - vulcanrush 16:25:48 01/09/11 Thank you guys, I will have Cometic head gaskets.... - puchy 22:38:55 01/10/11 I believe for the cometic head gasket to work - Jim (Selin Design) 16:13:11 01/09/11 I don't think I'm qualified for that job. the smoothness - puchy 16:29:18 01/09/11 OEM - Period. (n/m) - phillyz 16:33:13 01/09/11 Are you running 88mm pistons with oem gasket or - puchy 17:17:14 01/09/11 Many have. The OEM Head Gasket works with 88 mm Pistons. (n/m) - MixManMash 20:08:31 01/09/11 OEM is fine with 88mm pistons. - nissanguyz32 21:44:53 01/09/11 Tomei MLS gaskets - Rob260 00:02:21 01/10/11 Stock = just fine (n/m) - John (MD) 13:52:00 01/10/11
Post a Followup	You cannot reply to this message because you are not logged in.