| same frequency as the 94+ OEM alarm brain. If it does you can program the remote to work w. our systems. All US Z32 factory keyless systems use FCC ID A269ZJA073 It is marked on the back of the units. Last time I needed one I found a Infiniti unit on eBay for around $50. Programming is pretty simple: How to Program the 300ZX Keyless Remote
1. Get inside your Z and close all doors.
2. Release the rear hatch with the lever by the driver's seat.
3. Lock the driver's door.
4. Insert the key in the ignition and then quickly remove it - six times in succession within 10 seconds. (6 in-and-outs within 10 seconds.)
5. Unlock and then re-lock the driver's door. (Don't open the door!)
6. Press a button (once!!) on your remote. (I used the big, "lock doors" button.)
7. Repeat steps 5 and 6 quickly if you have other remotes that you want to program.
8. Step out of your car and test the keyless remotes.
 Bernie Bilski berniebilski@cox.net
1995 Nissan 300ZX TwinTurbo in Cobalt Green
1997 Nissan 240SX SE in Ultra Red
ZCCNV #390 ~ ECZA #368 |
