Subject	The grille is held directly to the fascia by about 8 plastic
Posted by	ZXoltan on October 18, 2010 at 5:26 AM
	This message has been viewed 68 times.
In Reply To	Re: This might be helpful posted by Jiro on October 18, 2010 at 12:50 AM
Message	fasteners. These are Auveco 17472 or you can get from Nissan. The upper center retainer holds the top lip of the fascia to the upper reinforcement with around 7 10mm bolts (you can see this if you remove the center panel). The lower retainer uses 3 nuts to attach the front splash shield to the fascia. The left and right front fender shields (L-shaped) are held in by plastic fasteners and some screws and nut clips. Hope this helps.
Follow Ups	picture favor please of front bumper - Jiro 00:27:05 10/18/10 This might be helpful - CoHPhasor 00:45:08 10/18/10 Re: This might be helpful - Jiro 00:50:35 10/18/10 Another source - CoHPhasor 01:07:16 10/18/10 The grille is held directly to the fascia by about 8 plastic - ZXoltan 05:26:10 10/18/10 FINALLY! I remembered where I saw a nice guide. (thx Z1!) - CoHPhasor 01:41:23 10/18/10
Post a Followup	You cannot reply to this message because you are not logged in.