Subject	Im running Volk GTS wheels. 18x9 +40 front, 18x10 +38 rear
Posted by	Z32 TwinZ on October 14, 2010 at 10:06 AM
	This message has been viewed 295 times.
In Reply To	looking at a set og Volk GT-c's , I read that +44 on the posted by Rogy on October 13, 2010 at 07:07 PM
Message	the front could have been a little lower offset to fill the gap, but i didnt want a deep dish in the front, so i went with +40 and put a 5mm spacer and it looks good right now.. im going to get a 10mm soon to fill the gap just a little more and make it completely flush. the rears are pretty dead on, im running a 275 tire and there is a little room between the fender and the tire... i could have gone just a little lower with the offset, but i plan on getting a 285 tire which will fit perfectly. here is my post (scroll down about halfway)- [ http://forums.nicoclub.com/project-dtz-t362476.html?hilit=project%20dtz&start=40 ]
Follow Ups	looking at a set og Volk GT-c's , I read that +44 on the - Rogy 19:07:00 10/13/10 Those are my exact sizes and F & R are flush (n/m) - ashleymac 19:26:09 10/13/10 With what size tire? (n/m) - thumper 19:36:05 10/13/10 Im running Volk GTS wheels. 18x9 +40 front, 18x10 +38 rear - Z32 TwinZ 10:06:38 10/14/10 It will be ok but not flush. (n/m) - John@Z1 10:18:07 10/14/10 With a 255 in front you'll be real close to the upper arm. - just4kinks 12:41:28 10/14/10 +42 front is a little high, IMO, but it will allow for a big - Scotts94z32 13:14:25 10/14/10 +42 is going to sit in from the fender - z-owned 19:00:29 10/14/10 but from 36 to 42, only 6mm, not even quarter inch... - Rogy 23:53:53 10/15/10
Post a Followup	You cannot reply to this message because you are not logged in.