TwinTurbo.NET: Nissan 300ZX forum - Double check the VTC Cam Gears and make sure they aren't
People Seeking Info
 
   


     
Subject Double check the VTC Cam Gears and make sure they aren't
     
Posted by MixManMash on April 22, 2010 at 12:47 PM
  This message has been viewed 120 times.
     
In Reply To Quite a bit...60K service, and... posted by evan_aggie on April 22, 2010 at 10:04 AM
     
Message leaking oil. I got burned by this one.

Easiest way to check is when you do the timing belt, pull of each Intake Cam Gear and check to see that you cannot spin the back separately from the gear. If you can, they are leaking.

I also recommend replacing as many gaskets/seals as you can, short of head gasket. While you are at it, you might as well get the valve covers off, replace the gaskets and do a PCV re-route.

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.