Subject	No relationship whatsoever
Posted by	LitlElvis on April 21, 2010 at 4:22 PM
	This message has been viewed 118 times.
In Reply To	is this the reason for the caps on the back of them melting? posted by LJZTT on April 21, 2010 at 03:14 PM
Message	The solenoids melting their end caps is most likely from excessive underhood heat.
Follow Ups	What controls the amount of VTC timing advance? - Zarcasm(Hfd, CT) 18:13:19 04/20/10 IIRC VTC solonoids are duty cycled - Spddracer 19:44:17 04/20/10 I believe its just off of oil pressure. - Machtavian 20:00:06 04/20/10 I think you'll find it engages above idle... - zx299 20:12:50 04/20/10 Thats what I said. (n/m) - Machtavian 20:51:31 04/20/10 Where did you come up with the 2,500 rpm number? - Zarcasm(Hfd, CT) 21:20:16 04/20/10 That's where Greg D. sets them to come on if my memory - Machtavian 21:29:43 04/20/10 nope, try again (n/m) - Seb@Specialty-Z 23:32:10 04/20/10 My understanding of the VTC system..... - zx299 19:54:48 04/20/10 They are either on or off depending on engine load. - Ash's Z 19:55:30 04/20/10 Interesting , I must be thinking too new ;) - Spddracer 20:14:36 04/20/10 This was supposed to be... - xpwarrior 20:52:16 04/20/10 Thanks Ash. Ever heard of a VTC acting lazy and sluggish? - Zarcasm(Hfd, CT) 21:12:02 04/20/10 I have a hard time visualizing the VTC mechanism being - Ash's Z 07:36:11 04/21/10 Does the a/f schedule directly depend on VTC advance? - Zarcasm(Hfd, CT) 19:02:23 04/21/10 It's a simple on/off mechanism with the control variables - LitlElvis 07:04:52 04/21/10 is this the reason for the caps on the back of them melting? - LJZTT 15:14:08 04/21/10 No relationship whatsoever - LitlElvis 16:22:24 04/21/10 Thanks LitlElvis - Zarcasm(Hfd, CT) 19:12:56 04/21/10 My guess is the closed loop a/f adjustments do not base - LitlElvis 23:08:42 04/21/10 I recently used ATF to clean out the oil - Zarcasm(Hfd, CT) 20:10:20 04/22/10
Post a Followup	You cannot reply to this message because you are not logged in.