| Message |
That if you tear down a motor just to replace rings, he might as well go with an aftermarket piston. This is probably what he was going with.OP, keep in mind that with the higher CR, you will have to run slightly lower boost/higher octane fuel to prevent detonation. I would recommend Wiseco though. If you are wanting to go with a higher CR though, JE would be your best bet as I am unsure whether or not CP has higher CR pistons. Also, don't post in caps and expect people to WANT to help you. Ask your questions politely and without an attitude (at least until you get some establishment on the forums) and you will have a much better turnout that doesnt include "stupid noob" "turn off the fucking caps asshat" and anything else that will grow from this. Take care.
|
 |