Subject	check for oil in your IC pipes
Posted by	aliaZ on March 06, 2010 at 6:07 PM
	This message has been viewed 249 times.
In Reply To	Smoking z issues on turbo and engine rebuild : ( posted by Jkova300z on March 06, 2010 at 05:10 PM
Message	if your IC pipes are dry, you can rule out the compressor side of the turbo pull plugs, look for ashy deposits on the plug tips. This indicates oil is being burned in the combustion chamber. If your plugs look clean pull your DP's and look for oily deposits in the turbine housing. This indicates a blown turbine seal. The oil is coming from one of three places: The compressor, the engine itself, or the turbine housing
Follow Ups	Smoking z issues on turbo and engine rebuild : ( - Jkova300z 17:10:14 03/06/10 Stock turbos + free flowing exaust quickly = smoke. - Ash's Z 17:40:28 03/06/10 So is it harmfull to the stock turbos to have such a - Wright (Ca) 18:12:48 03/06/10 I wouldn't worry about it - aliaZ 19:14:32 03/06/10 huge 2nd. (n/m) - Seb@Specialty-Z 19:29:34 03/06/10 I didn't mean for it to sound like all turbos will have this - Ash's Z 16:16:43 03/07/10 I think its more old worn turbos are sensitive to it (n/m) - Antihero 23:50:03 03/06/10 check for oil in your IC pipes - aliaZ 18:07:33 03/06/10 The only thing that seems wierd to me is that both of the - Jkova300z 19:10:58 03/06/10 Well your exhaust probably has a balance tube like - Seb@Specialty-Z 19:28:18 03/06/10 Actually yea it does, I was thinking of my old exhaust that - Jkova300z 19:51:22 03/06/10 imperfect honing of z motors sometimes causes oil burning - ztunerz 19:19:32 03/06/10 Imperfect honing =not using torque plates? - ZXoltan 19:24:24 03/06/10 now besides checking the plugs... would doing a compression - Jkova300z 20:08:01 03/06/10 it might - who did the machining (n/m) - ztunerz 22:28:38 03/06/10 Sounds like Rings need to seat still - arthoes 13:16:09 03/07/10 yep (n/m) - aliaZ 21:08:46 03/06/10 Did you get my email? (n/m) - aliaZ 21:45:43 03/06/10 yes looking at it, was a busy day for me :) - ztunerz 22:30:16 03/06/10 How often have you come across that? - ZXRider 22:40:37 03/06/10 Re: Smoking z issues on turbo and engine rebuild : ( - WazTTed 23:29:42 03/06/10 you only need cats on worn out stock turbos (n/m) - aliaZ 23:41:32 03/06/10 To clarify on this... i bought a built long block from an - Jkova300z 02:11:49 03/07/10 A common mistake engine builders make when building our - ztunerz 10:59:50 03/07/10 Do you finish with 400? (n/m) - na300zx (OH) 11:32:00 03/07/10 What color is the smoke? (n/m) - DVDBURN (MD) 17:16:01 03/07/10 To follow up, I was driving today and noticed that it only - Jkova300z 18:05:37 03/07/10 What color is the smoke??? - DVDBURN (MD) 20:33:30 03/07/10 Check to see if the used the correct banjo bolts - ztunerz 21:01:37 03/07/10 As far as smoke... I don't know how distinguishable it is - Jkova300z 00:31:38 03/08/10
Post a Followup	You cannot reply to this message because you are not logged in.