TwinTurbo.NET: Nissan 300ZX forum - Get a dust mask, Al dust is bad to breathe.
People Seeking Info
 
   


     
Subject Get a dust mask, Al dust is bad to breathe.
     
Posted by AshsZ (In Florida) on June 26, 2001 at 4:21 PM
  This message has been viewed 25 times.
     
In Reply To Thinking of hand polishing plenum, any warnings? posted by Mike B (Houston) on June 26, 2001 at 03:33 PM
     
Message They have found that when someone has Parkinson's disease, there is an accumulation of Aluminum fluoride in their brain tissue. Fluorine comes from your drinking water and toothpaste, getting Al into your system *may* not be a good idea.


: Blame SwingMob41 for planting the idea in my head :-) But i'm about to go run down to Lowes and buy a dremmel and a few other goodies. Here's the list i got from http://www.scuderiaciriani.com/rx7/polishing.html

: You will need:

: 40, 80, 180, 220, 320, 400 and 600 grit sandpaper (40, 80 & 180 were 5 inch power drill disks ($17))
: a drill
: a mandrel for mounting polishing disks on the drill (available at ACE hardware $5)
: two 6 inch polishing wheels (ACE $13)
: a Dremmel tool or high speed grinder to get at the hard-to-reach places
: conical shaped sandpaper drums (Bright Works $15)
: 3/4 inch cylindrical sanding drums (ACE, course, med, fine $8)
: conical shaped felt bobs for the Dremmel tool (ACE $8)
: tripoli and white metal polishing rouge (ACE Hardware or Bright Works $13)
: and clean rags

:

Sooooo, before i start this, any horror stories? I'm still waiting on the turbos from SGP, now i'm hearing it'll be later this week, so i've got prolly till friday to complete the project.

My CarPuter Headquarters:
[ ashleypowers.terrashare.com ]
agpowers@bellsouth.net

     
Follow Ups  
     
Post a
Followup

You cannot reply to this message because you are not logged in.