| Message |
Blame SwingMob41 for planting the idea in my head :-) But i'm about to go run down to Lowes and buy a dremmel and a few other goodies. Here's the list i got from http://www.scuderiaciriani.com/rx7/polishing.html You will need: 40, 80, 180, 220, 320, 400 and 600 grit sandpaper (40, 80 & 180 were 5 inch power drill disks ($17))
a drill
a mandrel for mounting polishing disks on the drill (available at ACE hardware $5)
two 6 inch polishing wheels (ACE $13)
a Dremmel tool or high speed grinder to get at the hard-to-reach places
conical shaped sandpaper drums (Bright Works $15)
3/4 inch cylindrical sanding drums (ACE, course, med, fine $8)
conical shaped felt bobs for the Dremmel tool (ACE $8)
tripoli and white metal polishing rouge (ACE Hardware or Bright Works $13)
and clean rags Sooooo, before i start this, any horror stories? I'm still waiting on the turbos from SGP, now i'm hearing it'll be later this week, so i've got prolly till friday to complete the project.
|
 |
