Subject	Double check on the +18 offset unless you're running
Posted by	240Z FeO2 on January 28, 2010 at 2:39 AM
	This message has been viewed 176 times.
In Reply To	How wide can these go? posted by !!!life iz boozt!!! on January 28, 2010 at 01:43 AM
Message	flared fenders. One member reported a great fit for 18 x 10.5 SSR GT3s with +43 rear and 295/30 Toyo R888s. And 18x10.0 generally requires an offset in the range of +39 to +45 as well, at least according to the summary in this post: [ http://www.twinturbo.net/net/viewmsg.aspx?forum=technical&msg_id=935775 ] Chance favors the informed
Follow Ups	How wide can these go? - !!!life iz boozt!!! 01:43:04 01/28/10 345 and 325 are both too wide for 10.5" tires - collegeboy 02:15:57 01/28/10 Pics of 355s / 13.5s on a Z or it didn't happen (n/m) - BobbyT 04:18:46 01/28/10 There's plenty of pics of my Z online.It's not a stock body. (n/m) - collegeboy 04:58:11 01/28/10 No way you can fit 345 on a 10.5" wheel. - Pilot.P (NZ) 02:21:31 01/28/10 Agreed.. i ran a 325 on a 10inch wheel but.. - fst300zx 06:21:53 01/28/10 Double check on the +18 offset unless you're running - 240Z FeO2 02:39:44 01/28/10 305 on the rear (n/m) - John@Z1 07:57:46 01/28/10 You can safely put a 305 on a 10.5" wheel, but that - Scotts94z32 10:51:27 01/28/10 Make the wheels work on the car not the other way around. - treese88 11:08:10 01/28/10 Re: Make the wheels work on the car not the other way around. - !!!life iz boozt!!! 11:38:29 01/28/10 No, you would need a fender pull. You can get those wheels, - treese88 12:23:27 01/28/10
Post a Followup	You cannot reply to this message because you are not logged in.