Subject	IMHO highly unlikely he'll get the O2 sensors out with the
Posted by	240Z FeO2 on December 12, 2009 at 12:36 PM
	This message has been viewed 83 times.
In Reply To	stubby 13mm wrench, ratcheting 13mm flexhead wrench posted by LJZTT on December 12, 2009 at 03:30 AM
Message	precats still in. Better strategy is to just disconnect the O2 harnesses, take the precats out with the sensors in place, and monkey with the sensors later. But if he has a crowfoot or sensor socket on hand might as well give it a minute's work. I tried, too. Chance favors the informed
Follow Ups	questions about pre-cat/downpipe replacement - surfer31337 22:04:41 12/11/09 Won't require transmission pull (will require patience) (n/m) - lazer(NV) 22:28:16 12/11/09 he'll certainly be billed for a transmission pull though, - LJZTT 03:22:32 12/12/09 If you want to tackle a DP and TP installation yourself - 240Z FeO2 00:23:24 12/12/09 stubby 13mm wrench, ratcheting 13mm flexhead wrench - LJZTT 03:30:08 12/12/09 IMHO highly unlikely he'll get the O2 sensors out with the - 240Z FeO2 12:36:13 12/12/09 thinking back on it, I think I did pull mine out with the - LJZTT 13:11:58 12/12/09 The 3" expansion downpipes are getting incredible power - zellamay 08:46:35 12/12/09 I have a feeling your turbo lag is from something else. - Summeronthechain (MN) 10:08:21 12/12/09 what do you suspect my problem is? i would love to be wrong - surfer31337 18:16:48 12/13/09 The hardest part...... - Zluster 03:11:21 12/13/09 Have you run the 6Ps on your car? To find them make your way - 240Z FeO2 21:56:37 12/13/09
Post a Followup	You cannot reply to this message because you are not logged in.