Subject	Exactly, doesn't matter what cooler you're using, the OEM
Posted by	zgene4 on November 11, 2009 at 2:49 PM
	This message has been viewed 70 times.
In Reply To	The valve is inside the filter tree. posted by Guapo on November 11, 2009 at 02:13 PM
Message	oil cooler pick-up points won't provide full flow "Too dumb for opera, too smart for NASCAR."
Follow Ups	Anyone tap into an oil cooler line for an Oil Temp Gauge? - d_flore 11:25:20 11/11/09 Not the best location as oil only flows through those - zgene4 12:27:01 11/11/09 what about aftermarket oil coolers...check valve too ? - TTkeeper 13:38:06 11/11/09 Hmm I dont belive I have the valve you mentioned as I am - d_flore 14:09:48 11/11/09 The valve is inside the filter tree. - Guapo 14:13:15 11/11/09 ^^ Thats a good one to use. (n/m) - toykoz32 14:29:48 11/11/09 Exactly, doesn't matter what cooler you're using, the OEM - zgene4 14:49:43 11/11/09 Well that looks pretty much perfect. Thank you (n/m) - d_flore 15:11:58 11/11/09 You wouldnt happen to know if a similar item is avialable - d_flore 15:44:10 11/11/09 You need a 1/8"PT brass T, a 1/8"PT to 1/8"BPT thread - zgene4 15:54:24 11/11/09 no - gt300zxtt 16:27:05 11/11/09 its in the oil tree (n/m) - ztunerz 18:44:48 11/11/09 I used an oil filter sandwich. Easy. (n/m) - Got Z? 15:18:13 11/11/09 I was going to do that but i worried about the filter - d_flore 15:42:58 11/11/09 mine doesn't hang too low. I have a greddy. (n/m) - SuparexTT 15:52:04 11/11/09 I used SPL's sandwich (NLA). Works fines. (n/m) - Got Z? 17:02:20 11/11/09 On the opposite side of the oil filter tree is a plug - JustinSCZ32 19:38:44 11/11/09 opposite side of block* (n/m) - JustinSCZ32 19:39:16 11/11/09 Do what? (n/m) - Multi_Read (MO) 20:26:30 11/11/09 I belive that is where my stock oil press sensor is due my - d_flore 20:42:48 11/11/09 Yea, im pretty sure that's why there is a port there.. (n/m) - JustinSCZ32 20:47:16 11/11/09 I am not clear on what you are saying. I dont think the - d_flore 22:04:00 11/11/09 just look on the other side of the block - JustinSCZ32 09:43:22 11/12/09 thank you (n/m) - d_flore 15:00:37 11/12/09 I put an oil temp sensor there and it doesn't work very well - Mongoose 20:26:23 11/12/09 I used a oil sandwich plate for my pressure and oil temp - john90zxtt(OH) 21:19:39 11/11/09
Post a Followup	You cannot reply to this message because you are not logged in.