| Maybe you didn't see my post when I was asking how much interest there is in having a setup to switch programs. From the replys there doesn't seem to be that much. Member "RevTech" post links to all the hardware you would need from Moates. I knew what moates was selling (I've checked out their website many times) but I wanted to make my own design to do this and sell it as a complete package to include burning the eprom and installing a socket in your ECU if needed. Here again are the links to the Moates hardware. The eprom socket adapter to allow a larger eprom.
[ http://www.moates.net/product_info.php?cPath=73_68&products_id=87 ] The remote switch that Isa'sZTT is using.
[ http://www.moates.net/product_info.php?cPath=73_68&products_id=47 ] The larger eprom needed to hold 16 32k programs.
[ http://www.moates.net/product_info.php?cPath=26&products_id=40 ] All you need after getting this hardware is to have someone program the eprom for you unless you can DIY. I was going to have a 2 program board and a 4 program board made. I had already designed them out. I've since decided to just change the design of my four program board to a 16 program and just sell that instead. The cost to have the board made for 16 programs is almost the same anyway. Once I get the boards and verify that everything is OK I will put them up for sale in the classifieds forum. Since the remote switch is already available for a fairly inexpensive price I decided to let people use that with my boards. If you do not want to buy the remote switch from Moates and still want an external switch you can run a cable with 5 wires from my board to your own switch/switches to change the programs. To change programs, my board has a selectable dip switch on the board and holes for adding a cable to an external switch. As far as price, I've decided that my board to include burning an eprom with the BIN files you provide will be less than $100. If you only have one BIN file and would like to have it modified for use as a second program that would disable your car from exceeding 30mph then I will also include that in the cost. If you needed to send me your ECU to have a socket installed that would be an additional cost but my goal is to keep that with the board and the eprom burned at not more than $150 shipped. To make things clear, I did not know that SZ was selling a simular setup and I had already started determining prices for my package before knowing SZ's price.
 (Total Mouse Over Hits: a Lot) www.mytwinturbo.com Watch an ECZA meet caravan! Watch a DVDBURN video!
|
