| I guess this is primarily for people who do not want to go with an all out Nistune setup. I have designed two types of boards that will allow you to switch between tunes. One board will allow you to switch between two different tunes. To do this you can either change switch settings on a DIP switch that is mounted on the board or you can run wires from the board (holes for wires going to an external switch are on the board) to an external switch mounted elsewhere. The second board will allow you to select from four different tunes in the same way you are able to do with the two tune board. These boards are 2x2 inch in size and can be plugged right into an ECU which has already had a socket installed. For those who already have a socket installed in their ECU and are a little electronic savvy, all you will need to do is email me your BIN files which I will burn to the boards. When you receive the board all you will need to do is swap your eprom with the board. Switching instructions will be provided. Other things you can do is use a modified primary tune as a secondary tune on a two tune board to limit your car's abilities such as max speed and max REV. This may be useful if you need to put your car in the shop and don't want anyone joy riding it or even to help protect your car by disabling these things in case it gets stolen. As far as quality, the boards are professionally built buy a circuit board manufacturer in the same way member "xtensive" did with his interface boards. I am also using plug in eproms so the boards themself have sockets. This way you have the ability to easily make modifications without having to buy a new board.
 (Total Mouse Over Hits: a Lot) www.mytwinturbo.com Watch an ECZA meet caravan! Watch a DVDBURN video!
|
