Subject	According to SZ there really are 2 issues here:
Posted by	240Z FeO2 on August 19, 2009 at 4:29 PM
	This message has been viewed 63 times.
In Reply To	ehhh but, they don't coat the insides of turbo manifolds posted by LJZTT on August 19, 2009 at 12:15 PM
Message	Coating on the inside of the manis that flakes off--not coating on the inside solves that--and failure and cracking due to heat retention. If just coating on the outside eliminates concerns about heat retention, fine and dandy. But it seems to me that SZ could just as effectively dealt with concerns over liability or bad PR by saying "don't coat on the inside" as "don't coat at all" if the former is what they truly believed to be optimum. But I really just posted the bit from SZ to get a discussion going about if coating was a good idea and, if so, where to coat. Chance favors the informed
Follow Ups	has anyone ever painted/coated their manifolds? - SuparexTT 06:26:43 08/19/09 yes, HPC Hipercoat Extreme "thermal barrier" (n/m) - LJZTT 06:31:19 08/19/09 Yes. Swain White Lightning. (n/m) - collegeboy 09:03:28 08/19/09 Regarding MSP manis.. - 240Z FeO2 11:11:29 08/19/09 ehhh but, they don't coat the insides of turbo manifolds - LJZTT 12:15:21 08/19/09 According to SZ there really are 2 issues here: - 240Z FeO2 16:29:06 08/19/09 you should call SZ - LJZTT 17:40:34 08/19/09 Mike Smith recommends coating them - aliaZ 12:15:57 08/19/09
Post a Followup	You cannot reply to this message because you are not logged in.