Subject	They look fine.
Posted by	phillyz on July 20, 2009 at 4:43 PM
	This message has been viewed 133 times.
In Reply To	MT Drag Radials posted by DualZ (SF) on July 19, 2009 at 11:40 PM
Message	Make sure they are not patched. When you get to the track drop the pressure to 18 psi, do a moderate burnout and stop when you start seeing smoke for about 3-4 seconds. I make over 600 RWHP and have a stock suspension that I leave in touring mode at the strip. I run high 10's with a decent 60' time. They hook up great and drive fairly well on the street at 32psi. I look forward to mid to low 10's in the fall with a better launch in high boost. Good luck! "All I heard was all of this air whooshing around behind me and then you blew by me, just when I thought I had you." - Disgruntled Mustang GT Owner :-(
Follow Ups	MT Drag Radials - DualZ (SF) 23:40:25 07/19/09 Re: MT Drag Radials - zbest1 00:14:06 07/20/09 Just FYI - ZLover4Life 00:35:39 07/20/09 Those look pretty worn to me.... get some tread depth - zxtuner161 01:42:02 07/20/09 when you measure the tread depth>>>> - zxtuner161 01:57:25 07/20/09 2nd on stock suspension for launching (n/m) - JustinSCZ32 10:15:34 07/20/09 well sadly i have coilovers - DualZ (SF) 12:55:33 07/20/09 Softer the better. You want a soft sidewall tire w/stiff - zxtuner161 15:03:18 07/20/09 Also, another important part of setting your car up is - zxtuner161 15:30:24 07/20/09 i wouldnt pay $250 for them, which track are you planing - Nostype2 03:43:33 07/20/09 True, I do run them. In fact...... - DrDCanaceu 09:21:09 07/20/09 How many psi do you run in these tires daily? (n/m) - CaliguyPurdue (Selin Design) 10:57:35 07/20/09 Re: How many psi do you run in these tires daily? - DrDCanaceu 09:18:28 07/21/09 infineon raceway aug 17th - DualZ (SF) 12:52:40 07/20/09 They look fine. - phillyz 16:43:28 07/20/09 Auto Or Stick? - Jason300zxTT 17:53:43 07/20/09 stick and they are "ET Street Radial tires." (n/m) - DualZ (SF) 18:01:04 07/20/09 I've pulled 1.61 60fts with MT DR's on my 5 speed - TTFairladyZ 10:37:09 07/21/09
Post a Followup	You cannot reply to this message because you are not logged in.