| 1) Anyone with the Bose DIN speaker grill, will it fit nicely in the upper DIN as well as the lower? 2) Does anyone know the diameter of the fuel/water temp gauge faces in the dash? Like is it 60mm by chance? Someone with uninstalled gauge rings could you measure the ID where it snaps in place? 3) Will running NIStune negate the need of running a SAFC with dual MAFs for Dual POP? Or will I still need it to convert the two signals into 1 going into the ECU. Honestly, the dual MAF install confuses me/ I can't find a clear write-up. 4) Has anyone with a passenger airbag managed to install any electronics in the glove box? If so, i want to see pictures and pick your brain about a few things. 5) If you have installed an EGT probe into SZ 3 inch downpipes, where did you put it? I am thinking a weld in bung adjacent to the O2 sensor bung? Or I would consider putting it in the exiting side of the turbine casting, but consider it vs. the DP to be no significant difference. 6) How many licks does it take to get to the center of a tootsie roll pop? Thanks.
Jared
1994 Twin Turbo |
