Subject	my experience tells me that it's almost always best to
Posted by	KasbeKZ on April 14, 2009 at 9:44 AM
	This message has been viewed 48 times.
In Reply To	sanding down the z posted by ricky6991 on April 14, 2009 at 12:22 AM
Message	take an older car all the way down to the metal for the repaint. for that reason, i'd recommend 80 to get it most of the way down there, then go up to 180 as you get closer so that it is smooth. that would be my approach and it's worked very well for me.
Follow Ups	sanding down the z - ricky6991 00:22:15 04/14/09 You should really ask whoever is doing the painting (n/m) - lazer(NV) 00:34:42 04/14/09 Usually the best grit is 180 for sanding - MyDreamZ 00:49:23 04/14/09 consider this... - icsamerica 00:53:54 04/14/09 Also consider that .... - inski 08:28:42 04/14/09 When I worked in a body shop, we used 400 wet or dry - kkrofft (OH) 08:27:41 04/14/09 Yes... Kkroft has it right - fldc 11:15:43 04/14/09 my experience tells me that it's almost always best to - KasbeKZ 09:44:33 04/14/09
Post a Followup	You cannot reply to this message because you are not logged in.