Subject	Re: JWT wild cams with no porting - thoughts please
Posted by	Z300Z on March 27, 2009 at 11:02 PM
	This message has been viewed 240 times.
In Reply To	JWT wild cams with no porting - thoughts please posted by nissansx on March 27, 2009 at 10:44 PM
Message	When I had my heads stock on a 700bb turboed setup I could feel a big difference when I went with a Radius valve job and ported out the heads as well. You will notice big time. Now I didnt dyno to see if they were different results like I should have but you will notice that it will pull a bit harder on the same psi. Also I went with oversized 1mm valves and upgraded springs and JWT500 cams and ported out the heads. The only thing I did not do on my car was the solid lifters. Didnt want it to sound like a v8.
Follow Ups	JWT wild cams with no porting - thoughts please - nissansx 22:44:22 03/27/09 Re: JWT wild cams with no porting - thoughts please - Z300Z 23:02:41 03/27/09 why do you think your car would sound like a v8 with solid - ztunerz 02:47:17 03/28/09 You know many modern day OEM 4 and 6 cylinder engines - AZHeat 12:34:30 03/28/09 Your biggest gains will come from a SZ 3" - RHulme 23:51:55 03/27/09 Re: Your biggest gains will come from a SZ 3" - nissansx 23:53:53 03/27/09 You will gain more from porting and stock cams than - AZHeat 01:18:16 03/28/09 i don't think so (n/m) - ztunerz 02:40:28 03/28/09 I just looked at your dyno graph. Your cars - AZHeat 02:53:07 03/28/09 I dont think Harry cares. That's a Z he had probably years - 95TTLP2 14:01:30 03/28/09 Same here, that was my dyno years ago too. (n/m) - AZHeat 14:10:03 03/28/09 on pump gas with 300 miles on the motor ? - ztunerz 20:39:41 03/28/09 I just did this >>> - ztunerz 02:40:02 03/28/09
Post a Followup	You cannot reply to this message because you are not logged in.