| Message |
Just take it apart already, it's not like it's a mechanical part. That being said, the 2+2 center console is obviously different from the coupe because, well, it's a 2+2 and there are rear seats. I'm kind of astounded that you poked a hole in the material too; you should have just lifted the material up, and you would have seen it was only being held by a few strips of tape. Now you have holes in your fabric. Also, now you can understand the poking fun of newbs in their profile when it says something to the effect of "still doesn't know what the headlight aimers are for." Lastly, the door panels were only different in US 90-93 cars vs 94+ and Canadian cars. The seat belt bolt in the upper door piller will keep the pillar panel from being removed, but there should also be a small goldish-pink screw holding it in from the outside as well, which can be seen once you pop off the outside plastic circular cover (if yours is still intact). When in doubt, just wing it. It's just the interior.
Cheers,
JBrobst, The woman with blue nuts. 
|
 |
