Subject	On more trick... Holding the two washers on the bearings.
Posted by	Gordo 93TT Daytona on December 14, 2008 at 8:30 PM
	This message has been viewed 170 times.
In Reply To	Thanks for the info. posted by Boosted1 on December 14, 2008 at 07:58 PM
Message	Where the shifter bottom is inserted into the shifter fork the instructions require two (2) flat washers on either end of the ball bearings. These washers are on the INSIDE of the fork. Holding them in place on the shifter, on either end of the bearings, while locating and inserting the connecting bolt can be next to impossible. I solved the problem by using scotch tape. I wrapped the tape around bottom of the shifter to hold the washers in place. To locate the shifter in the fork, I inserted a golf tee and it lined up the holes, while punching thru the tape. When everything is centered, you can insert the bolt and fasten with the nylon lock nut. The scotch tape wears away almost instantly. gordo _________________________________________________
Follow Ups	Z1 Short Shifter Install. Some issues and fixes. - Gordo 93TT Daytona 16:15:09 12/14/08 Re: Z1 Short Shifter Install. Some issues and fixes. - Z_Pilot 16:26:36 12/14/08 The foam I used is 3/4" thick automotive sound absorption - Gordo 93TT Daytona 19:01:25 12/14/08 it's not so bad if you have someone else help - Ahmed (Chicago) 16:45:48 12/14/08 lol, i did the string trick too (n/m) - inf 18:45:46 12/14/08 The string idea started w/ my mittens when I a kid ;-) (n/m) - Gordo 93TT Daytona 19:03:31 12/14/08 I've found flex head gear wrenches to be invaluable - Guapo 19:03:42 12/14/08 Like this?? - Gordo 93TT Daytona 19:09:56 12/14/08 pic doesn't show, but this - - Guapo 19:15:06 12/14/08 Yep, those are them. Can't have too many tools. (n/m) - Gordo 93TT Daytona 19:18:29 12/14/08 I have those too - Drk93TT 22:43:34 12/14/08 indeed (n/m) - aliaZ 21:19:05 12/14/08 Thanks for the info. - Boosted1 19:58:50 12/14/08 On more trick... Holding the two washers on the bearings. - Gordo 93TT Daytona 20:30:26 12/14/08 Nice job Gord. A very descriptive post, but where are the - 94Z32XTT 23:52:29 12/14/08 Normally I would have taken pics. But as you note, this was - Gordo 93TT Daytona 06:50:03 12/15/08 Pics / Instructions courtesy of Z1 - The Devils Z 07:54:30 12/15/08
Post a Followup	You cannot reply to this message because you are not logged in.