Subject	What they test the sensor at and what they should run at
Posted by	Greg D. (Specialty-Z) on July 03, 2008 at 2:06 PM
	This message has been viewed 181 times.
In Reply To	Re: wrong!!!!! posted by sparkie on July 03, 2008 at 01:18 PM
Message	are completely different things..... The sensor is designed to work best at 750 degree's. The hotter the sensor runs above the designed sweet spot can cause false readings. The hotter the sensor runs the sooner it will fail. The sensor is designed to work at a max bung temp of 550c. This does not mean you should run it there..... If you run the sensor in the downpipe of a Z32 you will likely get false readings and you will likely cause your sensor to fail sooner. To achieve the optimum operating temp and best readings and the longest sensor life on a Z32 I have found and recommend installing the sensor in the test pipes at least 6 inch's after the downpipe.
Follow Ups	Wideband O2 Install - GPA 10:02:24 07/03/08 Woah - Drk93TT 10:10:19 07/03/08 very nice!! (n/m) - fst300zx 10:19:47 07/03/08 Off topic, but the Braille battery, worth the money or no? - LJZTT 10:28:04 07/03/08 So far, so good on the Braille. - GPA 10:46:10 07/03/08 A friend put one in his car but it hasn't left the body shop - LJZTT 12:34:13 07/03/08 Looks awesome, the stock battery always seems to be - en5 19:49:41 07/03/08 Why the passanger side test pipe? - dewdrew01 10:48:06 07/03/08 I have a pair of JAW (14point7) - pcproa 10:53:32 07/03/08 Not sure, but that's the way Greg D at Specialty Z - GPA 10:54:14 07/03/08 just get a second bung welded and u can swap from side - Atl300zxTT 11:16:56 07/03/08 Thanks, I'm picking up a pair of those. The projects never - Agner.S(CT) 11:38:23 07/03/08 nice - ZiNnYc 10:53:29 07/03/08 I played with the location of the gauge and put it as - GPA 11:00:13 07/03/08 You mounted the sensor too far down stream. - sparkie 11:01:31 07/03/08 wrong!!!!! - Greg D. (Specialty-Z) 12:41:20 07/03/08 Re: wrong!!!!! - sparkie 13:18:21 07/03/08 Taken directly from the Innovate manual that can be found - Greg D. (Specialty-Z) 13:28:55 07/03/08 What they test the sensor at and what they should run at - Greg D. (Specialty-Z) 14:06:18 07/03/08 I wasn't trying to knock your products - sparkie 14:17:23 07/03/08 Your interpreting the information incorrectly...... - Greg D. (Specialty-Z) 14:45:47 07/03/08 I've been looking through Bosch's website, and can't find - Scotts94z32 14:51:42 07/03/08 Re: I've been looking through Bosch's website, and can't fin - sparkie 15:25:13 07/03/08 Innovate makes products to work with the Bosch sensor - Greg D. (Specialty-Z) 15:44:19 07/03/08 Here is a interesting responce from the owner of - Greg D. (Specialty-Z) 15:08:08 07/03/08 I appoligize for coming across a little strong there...... - Greg D. (Specialty-Z) 16:03:51 07/03/08 The problem is, you are right. (n/m) - ni[X]it 16:09:10 07/03/08 Thanks ni[X]it! I was happy with my information, I just - Greg D. (Specialty-Z) 16:22:59 07/03/08 Also from your pic - sparkie 11:11:35 07/03/08 I appreciate your input, but..... - GPA 11:18:38 07/03/08 Common sense... - sparkie 11:35:21 07/03/08 Like this: - sasha 11:37:20 07/03/08 Horizontal is just fine - Woody75 (Denver) 11:43:02 07/03/08 Agreed, it even states in the instructions that mounting - outkaZTT 11:53:19 07/03/08 optimum location is between 10 and 2 O'clock, BUT - Greg D. (Specialty-Z) 13:10:21 07/03/08 Thanks for the two write-ups over the last two days (n/m) - treese88 11:23:48 07/03/08 You're welcome. Trying to give a little back to a great - GPA 11:26:16 07/03/08 Looks clean...Good job! (n/m) - TheTwinZ (Peru) 11:30:47 07/03/08 You've done some really nice work on your Z, Looks great! (n/m) - Musashi Sword 11:33:12 07/03/08 very nice (n/m) - DoodMon(SD) 13:06:44 07/03/08 Keep it up, you're about 6 weeks ahead of me - J-Mart 13:46:08 07/03/08 looks great - gt300zxtt 20:50:06 07/03/08
Post a Followup	You cannot reply to this message because you are not logged in.