Another post regarding my recent upgrades.
This is the DEFI System which is awesome.
I didn't want gauges everywhere, but wanted to be able to accurately monitor Fuel Pressure,
Oil Pressure, Oil Temp, and Coolant Temp.
This unit is perfect for those parameters.
Thanks to all on this site for their input on the merits of this system as well as install suggestions.
Especially Guapo, Scott Smith, & Bernie.
And thank you to Kuah at SPL Parts for prompt shipping and technical support.Here's a few highlights: Coolant Temp Sensor:
 Fuel Pressure Sensor:
 I hated to remove this nice label to install the Display Unit, but it had to go. I managed to keep the
label intact and saved it in a ziploc bag:
 
I removed the knock-out plate and passed my wires through that opening for a clean install:
 
For the Control Unit, I put Velcro strips (included) on the bottom of the unit and in the Glove Box:
 
I drilled a hole and installed a Grommet for the wires to pass through:
 
Here's the Control Unit mounted in the Glove Box:
 These are the wires from the Oil Sensors coming from under the car, behind the passenger's side
fenderwell, and through the firewall:
 View of the Oil Pressure Sensor and Oil Temp Sensor attached via sandwich plate:
 And a few photos of the mounted Display Unit:
 
 |
DEFI-LINK Install - 
