Subject	Sorry for the delay...here it is.
Posted by	The_S_Man (Phoenix) on June 14, 2008 at 3:20 PM
	This message has been viewed 118 times.
In Reply To	also if you could provide the address info for the fan posted by aliaZ on June 14, 2008 at 09:44 AM
Message	The following addresses are what you will want to change: 7442(hex) - Electric pusher fan temperature threshold 2 (high speed) 7443(hex) - Electric pusher fan temperature threshold 1 (low speed) The stock setting at both of these addresses is 8c(hex). I lowered both of these address settings to 82(hex). On my cars, that value is right at the point that the fan kicks on in the summer, but not in the winter if I am using the AC. If you have access to an EPROM burner, you may want to play around with this value a little. If not, this value should work. Hope this helps, Jamie
Follow Ups	Would anyone be interested in a mod....... - twinturbineZ 23:14:12 06/13/08 Care to share the details of this mod? Vent temps that low - Dave N 23:16:29 06/13/08 I've never had that problem..However I do live in AZ - twinturbineZ 23:34:22 06/13/08 I'd most likely be interested if it's legit and safe. (n/m) - ZLover4Life 23:38:00 06/13/08 Of course..I wouldn't put anything on my cars that wasn't - twinturbineZ 23:48:20 06/13/08 ok..... I'd be in. (n/m) - Tu 23:38:20 06/13/08 I live in AZ and I would be interested for $30 - 300zxer 00:23:41 06/14/08 Sounds good! (n/m) - twinturbineZ 00:41:43 06/14/08 Re: I live in AZ and I would be interested for $30 - ouikikazz 01:36:45 06/14/08 how is that not going to turn your evaporator into a - aliaZ 00:46:22 06/14/08 I can help you with that..as well (n/m) - twinturbineZ 22:49:25 06/14/08 you figured out how to lower the freezing point of water? - aliaZ 13:49:58 06/15/08 I'd settle for aneutronic 11B myself (n/m) - CaliguyPurdue (redesigning) 01:05:08 06/16/08 I Live in AZ - induetime 01:09:56 06/14/08 Thanks for the address... I think I will check it out :) (n/m) - Piranha(AZ) 16:11:52 06/14/08 Would like some further explanation, sounds interesting tho. (n/m) - xAzraelx 01:30:39 06/14/08 what a tease - gt300zxtt 03:35:01 06/14/08 2nd that! Tease of a post (n/m) - itsghoZt 18:03:54 06/14/08 Guys...I just asked...who...would be interested - twinturbineZ 22:48:41 06/14/08 That's like asking "who wants more horsepower?" - Guapo 22:56:19 06/14/08 I'm going to offer my mod to some local members - twinturbineZ 23:10:02 06/14/08 I'm not saying you are. Just the way you have presented - Guapo 23:21:16 06/14/08 Who are you again? (n/m) - Kenny 23:25:48 06/14/08 Here is what I had to do to get this performance... - The_S_Man (Phoenix) 07:33:12 06/14/08 you could probably retrofit a thermo control amp - aliaZ 09:42:29 06/14/08 also if you could provide the address info for the fan - aliaZ 09:44:12 06/14/08 Sorry for the delay...here it is. - The_S_Man (Phoenix) 15:20:48 06/14/08 i recharged with R134a during swap and mine is ICE cold (n/m) - pearlyellowtt 10:19:07 06/14/08 I would like to do this... - Kong ZTT GT28RS MD 11:03:59 06/14/08 Is this a product or just Iinformation? (n/m) - Spddracer 07:53:53 06/14/08 It's a product I created through lots of research - twinturbineZ 21:38:21 06/14/08 I got mine down to about 40 degrees once. :) - Waggz 09:03:19 06/14/08 Interested. - itsghoZt 09:45:08 06/14/08 Brand of R134a makes a huge difference as well. - pearlyellowtt 10:22:51 06/14/08 sounds like it wasn't charged correctly the first time - aliaZ 10:27:47 06/14/08 not different types, but brands. And yes some are a colder - pearlyellowtt 13:00:26 06/14/08 R134a is R134a - aliaZ 14:33:27 06/14/08 dude, he switched brands and it was colder - Adam (NoVA) 07:17:22 06/15/08 I dunno, I think RC Cola makes my A/C run colder than Coke (n/m) - vorpalZ 09:06:30 06/15/08 that's because you aren't using Coke 0... (n/m) - Tu 10:56:05 06/15/08 This isn't using R12 freeze or some other new AC freon - marioz32tt (San Antonio) 11:03:31 06/14/08 As I said I created it..no one has done it yet - twinturbineZ 21:39:27 06/14/08 yea you need to explain this mod better.. this is like me - fst300zx 13:35:07 06/14/08 I will explain how it's done once you purchase the mod - twinturbineZ 21:42:24 06/14/08 I would be interested, would it work on a non Z32 car? (n/m) - tdogzjoint 18:44:10 06/14/08 Yes...I did it on my Lexus GS300 and Mazda MX6 as well - twinturbineZ 21:43:26 06/14/08 You got mail (n/m) - tdogzjoint 22:10:54 06/14/08 Anyone who might be interested drop me an email..and - twinturbineZ 23:12:10 06/14/08 why don't you quit being so secretive and tell us about this - aliaZ 13:48:08 06/15/08 2nd - Mickie 19:01:14 06/15/08
Post a Followup	You cannot reply to this message because you are not logged in.