i mounted my blitz ebc in the clock location - I took the clock apart (broken) and used the front of it with the mounting tabs. After trimming the center of it I found the ebc still wouldn't quite fit into the hollow rectangle it made, so I cut the top of the rectangle off and made a U shaped bracket from it. The ebc fit in the u, and I was able to use the 2 front top case screws of the ebc to mount it by drilling through the bracket after test fitting to get it at the right depth. a little trimming of the clock hole and it went in at a perfect depth and is held by the original clock screws. Very secure and looks great.
