Subject	How to test if they are going?
Posted by	ZBlacktt on June 08, 2001 at 7:59 AM
	This message has been viewed 16 times.
In Reply To	my stock recircs hold strong at 20psi so far. (n/m) posted by twinz on June 08, 2001 at 07:41 AM
Message	Cause the car will hold any psi under that fine, but when hammering it, right around 1.0 and little higher if hear this werid sound, like a jake brake on a 18 wheeler, but not as loud coming from up front. But I'm driving the car, so I have no idea how to check. But this will happen everytime. I'm running stock CC's for now so boost is 15 to 16 max at times, that's it. I replace every Vac line under the hood, every, replace all clamps etc. Will boost unto 1.0 bar, but that sound is their and the power drops their bigtime. STAGE V+++ Going to XII and beyond :)
Follow Ups	O.K., what's the Max psi on Stock BOV's,,,my can't hang. - ZBlacktt 01:50:20 06/08/01 Z has recirc valves stock not BOV (n/m) - TelZX 02:29:49 06/08/01 What do you hear? Re-circ valves should last to 17psi+ - Ragerkw91TT 02:46:45 06/08/01 Wrong, they start leaking way before 17 psi. (n/m) - SpdDemon13 (Baltimore) 07:13:15 06/08/01 my stock recircs hold strong at 20psi so far. (n/m) - twinz 07:41:29 06/08/01 How to test if they are going? - ZBlacktt 07:59:03 06/08/01 not sure. good Q for tech forum. > - twinz 08:33:57 06/08/01 Connect a vacum PUMP to the vacum - StEaMyZ(ZtoyZ.NET©) 09:48:57 06/08/01
Post a Followup	You cannot reply to this message because you are not logged in.