Subject	I know what you mean...I switched to Deats a while
Posted by	Yoshi on May 30, 2008 at 4:22 PM
	This message has been viewed 239 times.
In Reply To	Re: Did Deats replace them? posted by ali300zx on May 30, 2008 at 03:38 PM
Message	back and have not had a problem. Idle was like new again and the smoothness during acceleration was back! Sorry for your luck. This is rare to hear about Deats. Is the warranty for the newly replaced ones 1 year again, or are they also under the original 1 year time period?
Follow Ups	Did any1 install Deatschwerks injectors with their 95- kit ? - Dark Diver 04:17:35 05/30/08 Grinding the 90-94 plenum for #1 when using '95 - ThunderZ 06:23:07 05/30/08 You have to grind #1 for clearance ANY time you convert - Bernie (NoVA) 07:20:14 05/30/08 thus ... - Guapo 08:36:05 05/30/08 Poop, I forgot about that - BigTDogg (MA) 13:33:07 05/30/08 I hear the 90-94 style Deatschwerks injectors are still - Jason300zxTT 07:48:13 05/30/08 There is no such thing as a 90-94 Deatschwerks injector - Cade(PA) 07:57:00 05/30/08 hmm.. must of read the post wrong. - Jason300zxTT 08:56:10 05/30/08 I think I have a bad one already w/no road time on it.... - Marc (NJ) 09:34:07 05/30/08 Check your wire splice. (n/m) - Bernie (NoVA) 09:49:58 05/30/08 Wire splice is fine, could the injector be stuck? or clogged (n/m) - Marc (NJ) 10:11:25 05/30/08 Maybe but unlikely - how does the spark plug/coilpack or - Bernie (NoVA) 10:34:48 05/30/08 Swapped coil pack, no change, swapped plug with #1 - Marc (NJ) 15:10:02 05/30/08 Did you check for spark? If the plug was wet, the - ThunderZ 21:10:22 05/30/08 It could be the connector. Check your wiring. If freshly - Yoshi 13:29:22 05/30/08 it's a kick ass service/product they offer (n/m) - LJZTT 09:34:33 05/30/08 I regret buying deatschwerks - ali300zx 10:24:00 05/30/08 Well buying "resized" stock injectors isn't be best idea - Bernie (NoVA) 10:36:22 05/30/08 Did Deats replace them? (n/m) - Yoshi 13:30:09 05/30/08 Re: Did Deats replace them? - ali300zx 15:38:02 05/30/08 I know what you mean...I switched to Deats a while - Yoshi 16:22:40 05/30/08 I hope you guys are ALSO doing the 12v injector rewire - Bernie (NoVA) 16:55:23 05/30/08 FYI -- I've had 5 old style (new) ones installed for 1 year - jzack 17:29:18 05/30/08 yes 740's and i just used a dremel and grinded out the area - pearlyellowtt 08:03:26 05/30/08 OK, thanks guys, that's what we did. - Dark Diver 16:28:34 05/30/08 They rebore stock injectors to get the higher flow rates. - Bernie (NoVA) 16:57:27 05/30/08 Re: They rebore stock injectors to get the higher flow rates. - ouikikazz 18:00:06 05/30/08 Make your own conclusions... - Bernie (NoVA) 19:42:30 05/30/08 Re: Make your own conclusions... - ouikikazz 02:17:22 05/31/08
Post a Followup	You cannot reply to this message because you are not logged in.