Subject	Are you installing those cores into USDM mirror casings?
Posted by	JBender on April 18, 2008 at 12:02 AM
	This message has been viewed 101 times.
In Reply To	Alright, silly question... posted by whitepearlz on April 17, 2008 at 08:27 PM
Message	I had issues getting mine to line up at all in the USDM casings, so I just used the JDM mirror externals as well. For the wiring, you don't need to add any relays or additional hardware. I had to take mine apart last year when I did this swap, because my switch didn't come with a wiring harness, so I had to follow the traces and match their functions with the stock switch. I'll see if I still have the wiring diagram I made around here, but if you have the harness, I think there's a post floating around that matches up the colors in the USDM harness with the JDM switch harness.
Follow Ups	Alright, silly question... - whitepearlz 20:27:27 04/17/08 here you go - spyhunterTT + 93Vert(nj) 20:50:24 04/17/08 I should rephrase. I'm not entirely stupid when it comes to - whitepearlz 21:47:24 04/17/08 there's nothing between the motor and switch - spyhunterTT + 93Vert(nj) 05:48:59 04/18/08 Thank you. (n/m) - whitepearlz 13:19:06 04/18/08 You should work on your Z at my place - Spectrum (WI) 21:49:04 04/17/08 If you are so worried about it - Spectrum (WI) 22:47:03 04/17/08 Are you installing those cores into USDM mirror casings? - JBender 00:02:43 04/18/08
Post a Followup	You cannot reply to this message because you are not logged in.