Subject	FWIW I made ~410 at 17Psi
Posted by	Waco300zx(DFW) on April 12, 2008 at 11:09 PM
	This message has been viewed 146 times.
In Reply To	dyno results posted by z32pilot on April 12, 2008 at 07:54 PM
Message	with low compression, and no Boost Controller or SMIC upgrade... I'd think you should be in the low 400's for sure. Check for vaccum/boost leakes, fuel pressure, AF ratio, and run a compression check Deceased 2-20-08 ============================================== ===================Waco300zx====================
Follow Ups	dyno results - z32pilot 19:54:39 04/12/08 depends on the type of dyno, but those seem low for 500's (n/m) - Guapo 20:26:56 04/12/08 Re: depends on the type of dyno, but those seem low for 500's - z32pilot 20:41:54 04/12/08 AF? (n/m) - Halo Z 20:34:28 04/12/08 Re: AF? - z32pilot 20:42:37 04/12/08 Mistake #1 (n/m) - SeedyROM 23:00:18 04/12/08 race gas or pump gas ? --that is about right on pump - The Devils Z 20:50:57 04/12/08 no it isn't (n/m) - Guapo 21:00:07 04/12/08 guapo, - z32pilot 21:44:50 04/12/08 guapo is right ....when you increased the psi from - The Devils Z 22:03:23 04/12/08 Something is off - s3trios 21:53:04 04/12/08 Seems low. I did 352/377 14 psi with auto stockers. - Spddracer 21:57:29 04/12/08 compression #'s? Is the engine healthy? - vorpalZ 22:06:05 04/12/08 You have to have a leak somewhere how do you loose power - 5280Z_nightstalker 22:14:48 04/12/08 FWIW I made ~410 at 17Psi - Waco300zx(DFW) 23:09:46 04/12/08 Seems low... I was 400 rwhp with stock turbos. (n/m) - Piranha(AZ) 01:15:00 04/13/08 Hmm... Perhapse a clutch slippage at higher rpms? - Waggz 04:37:38 04/13/08 I made 325/348 stock turbos /injectors @12psi with - Lazerrred 07:15:54 04/13/08 seems very low. - Jason300zxTT 12:45:09 04/13/08
Post a Followup	You cannot reply to this message because you are not logged in.