Subject	dyno results
Posted by	z32pilot on April 12, 2008 at 7:54 PM
	This message has been viewed 517 times.
Message	just came back from dynoing my buddy's new set up jwt sport 500 jwt ecu reflash removed boost jets 300 degree fuel rail nismo 555 injectors z1 side mount i/c greddy profec b spec this car was alresdy equipped with stillen exhaust random tech high flow cats apexi single intake megan racing down pipe jwt ecu for stock injectors and boost jets base run 299.6 hp 296.6 torque 14.5 psi 337.7 hp 317.9 torque 16.5 psi boost 335.5 330.4 torque is this about average ?? stock internals
Follow Ups	dyno results - z32pilot 19:54:39 04/12/08 depends on the type of dyno, but those seem low for 500's (n/m) - Guapo 20:26:56 04/12/08 Re: depends on the type of dyno, but those seem low for 500's - z32pilot 20:41:54 04/12/08 AF? (n/m) - Halo Z 20:34:28 04/12/08 Re: AF? - z32pilot 20:42:37 04/12/08 Mistake #1 (n/m) - SeedyROM 23:00:18 04/12/08 race gas or pump gas ? --that is about right on pump - The Devils Z 20:50:57 04/12/08 no it isn't (n/m) - Guapo 21:00:07 04/12/08 guapo, - z32pilot 21:44:50 04/12/08 guapo is right ....when you increased the psi from - The Devils Z 22:03:23 04/12/08 Something is off - s3trios 21:53:04 04/12/08 Seems low. I did 352/377 14 psi with auto stockers. - Spddracer 21:57:29 04/12/08 compression #'s? Is the engine healthy? - vorpalZ 22:06:05 04/12/08 You have to have a leak somewhere how do you loose power - 5280Z_nightstalker 22:14:48 04/12/08 FWIW I made ~410 at 17Psi - Waco300zx(DFW) 23:09:46 04/12/08 Seems low... I was 400 rwhp with stock turbos. (n/m) - Piranha(AZ) 01:15:00 04/13/08 Hmm... Perhapse a clutch slippage at higher rpms? - Waggz 04:37:38 04/13/08 I made 325/348 stock turbos /injectors @12psi with - Lazerrred 07:15:54 04/13/08 seems very low. - Jason300zxTT 12:45:09 04/13/08
Post a Followup	You cannot reply to this message because you are not logged in.