| of the features. For the other features, it's as follows: Alert if alarm goes off: all I had to do was hook up one wire to one of my aftermarket alarm siren wires Starter disable: splice in a relay Door unlock: I think this one is probably the trickiest as you have to figure out what kind of signal pulses are needed to unlock your door. This would depend on if you have an aftermarket alarm that already unlocks your doors or if you would try to actuate the stock system. There are some guidelines in the manual with regards to the types of lock for each manufacturer. I haven't had the time to try to set this up personally. Accessory activation: This one is just a simple connect a +12v wire from the unit to whatever accessory you want to turn on. Geofence button: This is included with the unit. Just find some place to hide it. You push the button for 2 seconds and it starts flashing to indicate it's on. Efence: You draw an area out on a map and e-mail it to Alltrack when they're programming your unit. The drawback is that you can not alter it unless you send the unit back to them.
Bernie, U.S. sales rep for... 
|
