| When I put test pipes on my car I got two O2 Simulators and two Heater simulators from the company listed below. They have worked great for me for almost a year now. They are not selling them now but if you go to there products page under O2 simulators there is a link to someone who is. If you go with O2 Simulators you will also need to get the heater simulators. I would contact Baker Electronix and see if you can still get the heater simulators from them. But you will need the heater sensors to get the check engine light to go away. If you check your codes now you should get 4 codes 0708 = Rear O2 sensor(left bank) circuit
1002 = Rear O2 sensor heater(left bank) circuit
0707 = Rear O2 sensor(right bank) circuit
0902 = Rear O2 sensor heater(right bank) circuit I destroyed the O2 sensors in my car trying to get them out so i just cut the wires in half and connected the O2 and heat simulators to the clip end of the wires so i could plug them in and unplug them when needed. Like next month. Missouri does not test cats other than a visual inspection. So the test pipes will have to come out and cats back in for a couple of days, unless I can find the right shop to help me out. If you get them and need me to do a write up gor them let me know. It will only take me about 30 minutes to pull one side out, take photos and do the write up. [ http://mysite.verizon.net/vze7erz1/index.html ]
 |
