| beautifully for keeping the tires on the ground. Here's how I set it up: 1. Turn off the RLTC and find what boost level you get wheel spin in any of the gears. 2. Set your desired boost level, and w/ the gear judge, set boost to just below the wheel spin boost. You do this by applying a % of full boost per gear. Boost is now dialed in. Move on to the RLTC: 3. Setup the % spin and cut tables to desired slip %- I use Wet 0%, Dry 2%, 7%, 10%, and 20%. Set it for &% on dry ground for driving hard. Done!
|