Subject	Re: I have decided to do a 5-Speed swap on my Z! A local friend
Posted by	300twinz (satx) on October 16, 2007 at 8:58 AM
	This message has been viewed 115 times.
In Reply To	I have decided to do a 5-Speed swap on my Z! A local friend posted by S.Watson on October 16, 2007 at 08:32 AM
Message	You don't need the 5spd alternator harness. No need to buy the NISMO pilot bushing-I've been told they are easier to crack if you don't stab the tranny correctly on your first try. If you buy the steel braided clutch line you will make things easier on yourself because you won't need to run the clutch line up by the passenger side fender. Also you can use the TT clutch booster and install it without removing the dash but that is a personal choice. San Antonio Z Club
Follow Ups	I have decided to do a 5-Speed swap on my Z! A local friend - S.Watson 08:32:17 10/16/07 Re: I have decided to do a 5-Speed swap on my Z! A local friend - 300twinz (satx) 08:58:59 10/16/07 Thanks! Does the clutch booster really make a big - S.Watson 10:09:01 10/16/07 yes (n/m) - spicyZ 10:39:11 10/16/07 You don't need the booster >>> - my91z 10:41:36 10/16/07 Which version of the RPS clutch do you have? How - S.Watson 12:18:14 10/16/07 The 6-Puck Sport >> - my91z 14:04:08 10/16/07 Howdy! (n/m) - Spddracer 16:15:36 10/16/07 ^^^ This guy is the one with the Southbend clutches ^^^ (n/m) - my91z 17:23:52 10/16/07 Impressive. Which kit would you recommend for my set-up? (n/m) - S.Watson 18:21:17 10/16/07 What do you do with your car? - Spddracer 19:05:45 10/16/07 Street car. Never ever ever will I abuse it at a drag strip - S.Watson 20:22:08 10/16/07 Our DxD OFE Stage 3 or 4 would be a great choice. - Spddracer 21:28:20 10/16/07 Thanks. I will shoot you an email shortly. (n/m) - S.Watson 22:42:08 10/16/07 Not worth the effort & hassle of install. (n/m) - YugoBernie (NoVA) 11:28:24 10/16/07 Darn. My clutch engages on the floor, and is stiff as - Hawkin"Z" 11:51:01 10/16/07 Bleed the fluid - are you using a TT pedal w. out a booster? - YugoBernie (NoVA) 12:00:45 10/16/07 Maybe not stiff as a board...but very, very, stiff. - Hawkin"Z" 12:04:02 10/16/07 As you can see opinions vary. I am very - 300twinz (satx) 12:11:31 10/16/07 Good call! - MidLifeZ (DFW) 09:31:16 10/16/07 Thanks for the suggestions. As for the flywheel, my - S.Watson 10:07:50 10/16/07 An OEM flywheel is really only "better" for drag racing - BigTDogg (MA) 12:23:14 10/16/07
Post a Followup	You cannot reply to this message because you are not logged in.