Subject	are you talking about the bushing for the auto that is
Posted by	Halo Z on July 17, 2007 at 10:39 PM
	This message has been viewed 48 times.
In Reply To	Conversion update posted by 300twinz (satx) on July 17, 2007 at 10:05 PM
Message	like the pilot bushing? i saw a trick on trucks or some other auto show on spike or speed on a sunday...they used a bolt that was just smaller than the inner diameter of the bushing. filled the hole with grease,place the bolt on the input shaft hole, and use a rubber mallet and firmly pound it in, the pressure pushed out the bushing. now when i used my old auto KA in a manual 240 i swapped it on to, i just soaked it with PB breaker for a day or so, i used a rubber mallet with different items to finally break it out. from the real "Transformers The Movie"...
Follow Ups	Conversion update - 300twinz (satx) 22:05:14 07/17/07 Should have just just used the n/a clutch master cylinder (n/m) - nissanguyz32 22:13:01 07/17/07 are you talking about the bushing for the auto that is - Halo Z 22:39:00 07/17/07 yeah he is talking about the converter bushing. - nissanguyz32 22:49:15 07/17/07 I'm down to just using a hammer and vice grips now. - Woody75 (Denver) 08:50:39 07/18/07 I use that "trick" all the time - 1badz32 (MN) 09:15:45 07/18/07 yep, it works wonders. - apudapus 13:57:15 07/18/07 I tried every trick to get that auto bushing out - TTFairladyZ 22:54:51 07/17/07 should have just used the n/a clutch assembly (n/m) - Guapo 22:57:28 07/17/07 glad to see it's moving along and you didn't have - sfarrah 23:30:56 07/17/07 hey Sean! All I have left is some wiring, - 300twinz (satx) 23:45:51 07/17/07 Are you doing a 5spd conversion? (n/m) - ZXRider(SoCal) 01:15:49 07/18/07 yes he is (n/m) - Ahmed (aka PakiHomBoy) 01:38:14 07/18/07 It's great to see all of these conversions going on. - brahmabull (CT) 08:49:20 07/18/07 I used this to remove my auto bushing - sino26 12:32:37 07/18/07
Post a Followup	You cannot reply to this message because you are not logged in.