| Here's what I did... - Hex head bolts for the coil packs (12)
- Hex head bolts for the power steering reservoir (3)
- Nuts/bolts for balance tube
- Bolt for fuel filter clamp (1)
- Hex head bolts for the fuel damper and FPR (4) - but regular SS bolts would be fine too.
- Hex head bolts for the Nissan cover plate (4)
- Then the same sized bolt for various brackets for radiator (2), fuse box (2), fusible link (2), cruise control bracket (2), fuel filter bracket (2), fuel hard pipes behind filter (2). I didn't use the plenum fuel hardlines - so nothing there.
- Cleaned up/painted the bolts used for the battery cable holder on rear firewall and the two bolts for the wiper module amp just because I didn't feel like running out to the store (but these 3 are the same size as the bracket ones above). Might have missed something (fender bolts, HICAS - I don't have this, etc) but this is most of it. FYI -- I also used non-metric washers/lock washers (or some combo of both) where I could get away with it. They are a lot cheaper and for most places work fine.
|
