| I have a stickypod for the outside of the car. Works on glass and paint with out issue. Plus the guy was local to me :) Stockypod For in car:
For a while I took out the hatch roll out cover and simply cut a 2x2 to length. Drilled a hole in each end. Removed the stock brackets that held the hatch cover in place (1 screw each side) and bolted the 2x2 in place. Put a bracket in the middle and bolted the camera to it. Now I have expanded that to make it even easier. I bought some square aluminum tubing and cut it to length. I took an old hatch cover that was shot and removed the plastic ends. Attached them to the aluminum bar and now the whole thing snaps into place using the stock hatch cover mounting brackets. Pops in and out with easy. I'll try to get some pics. I use the parts from my stickpod as well with the hatch bar to get different set ups. The riser, angle adjustment, etc. For the track car I have a roll bar in it so I'll just buy a roll bar mount once the car is finished.
JackB nimble JackB quick JackB can suck my dick =P - james-lee 11/02/01
Arrogance is the #1 weapon against Supra Owners - MikeH 08/06/02
Dallas with a Z: I like the bulge dude 05/02/03
Bezbefootball: Does dick have anything for me? 10/21/03 |
