Subject	front signals not fitting with aftermarket ic?
Posted by	RedSER13 on July 08, 2007 at 4:27 PM
	This message has been viewed 501 times.
Message	i just want to share the project i did. i got a pair of jspec/jdm signals that came from an NA and installing them on my TT, i found out that they would not fit in front of the stillen ICs as the back socket was hitting the IC. i'm not sure if the signals will fit the oem ic without modifying the sockets. i used a socket for GM autos that uses bulb number 1157. part number 85832, made by conduct tite, motorite. this socket was already fitted on my aspec signals. notice the socket by the amber part. the jspec sticks out and hitting the ic. i cut and trimmed the back side of the gm socket to make it fit. driver side trimmed. passenger side trimmed. all done and ready to install. another view. peace out!
Follow Ups	front signals not fitting with aftermarket ic? - RedSER13 16:27:56 07/08/07 looks good - Drk93TT 16:37:54 07/08/07 You won't have that problem. (n/m) - Russell@Z1 18:05:36 07/08/07 woot woot (n/m) - Drk93TT 18:09:34 07/08/07 That Z looks hot (n/m) - pcproa 20:47:27 07/08/07
Post a Followup	You cannot reply to this message because you are not logged in.