| Check here for what all I did prior to dyno: La-Z-Link I'm lost here Ash, I dont know if the doolz is making her run lean or what. The only leak I found was the inlet pipe at the drivers turbo (like the otherside I fixed), but it was not even close to as bad as the otherside. No other leaks anywhere. Now the sniffer they used was put into the drivers exhaust and the drivers turbo is the one with the small vacuum leak. Also you can see in the dyno video that the drivers exhaust is the one with the smake coming out of it and the other seems clean. The only thinkg I did not do was check the fuel pressure prior to dyno because I ran very short on time. But can the damper or regulator cause a lean mix? I have the TT fuel pump controller and wired in the wire its needs to work like the tt pump but the pump still seems to whine. Could the pump be not working at higher rpms. Now not sure what to check into.
1990 300zx 2+2 TT White w/ Blue Pearl Stage IX+ "She may beg, she may bleed, she may argue with her logic and mention all the things I'll lose, that really have no value, in the end she will surely know, I wasn't born to follow." |