| holds up well to the conditions and chemically bonds to itself once wrapped (when purchased, roll has a plastic separator that has to be removed so tape sticks to itself). They carry it in Home Depot but can also be found at better auto stores in those HELP! racks (Home Depot stuff costs a bit less). I've also used split wire loom for some situations and just used the cold wrap tape on the ends to seal things up (looks very similiar to factory work)... FYI -- Shrink wrap tubing is also a way to go (oversized tubing gets slipped over the lines (or harness) then is warmed with a heat gun and shrinks to fit nicely. This has to be done before any wires are soldered or butt crimp connected together.
|
