Yes I read the instructions when it arrived abut it having Molly grease to help with prelude although only found iton the outside of the pump as when I pulled it apart which was against their instructions and found after measuring the gears they were same as factory I was not impressed and emailed them. They simply offered me to refund after their answers were not suitable. Another guy over here bought one who emailed them and asked how they get more flow and pressure and they emailed him to say tighter tolerances which is not possible and only by machining out housing and making a wider drive and driven gear is this possible. Apart form adding washers or spacers on pressure limiting valve which they had not done. I was not willing to possibly waste money sending back to USA and possibly not receive a refund so I used it. I since sold this motor which made 612 hp at wheels and no probs and built another with similar power with stock pump and have not had issues. GTR's have lots of higher flow aftermarket oil pumps and not cheap although non for VG although probably not needed. I will be going dry sump with next motor with much more hp. Thanks for feedback guys and there should be a warning about these?
07:00:20 09/15/06
