| Message |
:  : 
: It fits perfect except, because of how thick it is, the stock fan hits the top of the shroud. Not by much, maybe 1/4 of an inch or so. The good news is that now, you can run an electric 16", 2500 cfm fan. The radiator hold almost 3 gallons. My temps are running 185 with the A/C on in normal city driving, and 175 on the highway. In stop and go traffic, 1DBD::ODBC::db prepare failed: (DBD: st_prepare/SQLAllocStmt err=-2) at incl_db.pm line 314.
: 99 was the highest it hit. That was today and it was about 90 here. Mark and Kyle are thinking DBD::ODBC::db prepare failed: (DBD: st_prepare/SQLAllocStmt err=-2) at incl_db.pm line 314.
: they might make it a little thinner so the stock fan can be used. I may try shaving a little off of each blade on the stock fan and see how that works. Also, we think there is an 18" electric fan on the market. We are going to try and get one to try. It looks like that may fit bDBD::ODBC::db prepare failed: (DBD: st_prepare/SQLAllocStmt err=-2) at incl_db.pm line 314.
: ecause there is about an inch space at the top and bottom of the radiator to spare. Clearence to the sides won't be a problem.
Matt
91TT Aztec Red stg III+ "Not everything that counts can be counted, and not everything that can be counted counts" A. Einstein.
|
 |
