| Message |
but vinyl is so easy to work with. Here's what I did. Pre cut the strips while they still had the backing on them, Then get a small spray bottle and fill it with just plain water. Soak the area that you will be applying the vinyl to. Get a friend to help you hold the strip up as you start peeling the backing off and applying it. Once you get it on there will be bubbles of water underneath the adhesive which allows the vinyl to move very freely. It will not stick down until you remove the water from underneath. After the vinyl is in place and where you want it, you need a rubber squeegee, start from the center and work the water out from underneath the vinyl. Once all the bubbles and water are out from underneath, let it dry in the sun and viola. Done. It is VERY easy.
|
 |
