I've been trying to be on yourside on this. Maybe one
of these under ground products will finally get made, but
your antics on this forum are absolutely retarded:unless you test both components on the same bench under the same conditions (I would have used the more restrictive, driver's side). I recall that Aliaz'(doctored) test outflowed everything invented since the Model T...even an open head.
NONE of the flow bench data I have goes into NEGATIVE
flow numbers (ie, GAINS over a stock head) ***except***
your questionable results from your Gen 1. Your front
drivers side flow numbers out flow AN OPEN HEAD WITH NO
MANIFOLD by 5 CFM!. NO other flow numbers I have
documented unbiasedly has shown a manifold to out flow the
source of the air (the head)! I've been racking my brain
trying to figure out if it's a venturi effect, or some
other thing, but i just cant figure it out. Perpetual
Machine? OPEN head @ .3 lift = 155.6/cfm
JA @ .3" lift = 163.8/cfm. OPEN head @ .3 lift = 163.7/cfm
MS @ .3" lift = 155.5/cfm. Explain how you GAINED flow over an open head with .3" lift?
...but please try to be reasonable.
AGREED Look (for yourself...for an hour if necessary) at the stock-like manifold. The center port of the new/old design almost flows backwards to the front port. My new design completely reshapes this for better flow and creates better separation between cylinders. Faith and personal loyalties aren't a bad thing, but don't dismiss common sense and others for trying something different from your preconcieved way of thinking.
you are pissing in the wind... and building a lot of
doubt in your ability to maintain clarity and manner. :Frustrating, how I have to explain everything. I really can't blame people for not having a better understanding.
It's hard to explain when you don't know yourself... It seems pretty clear to me now....after months of working on this project. I probably need to be a little more appreciative of those who are just beginning to do some upgrades on their TT's...and will gradually come to a better understanding of my work.... one day at a time. I honostly believe, and honostly hope after seeing this,
that your efforts go UNREWARDED. I've tried being on your
side, and tried helping you with your development through
constructive criticism, but you cant even just sit on your
hands and let your product speak for it'self.
Yea, the internet sure doesn't put names/faces together, or
personalities and delivery into the equation, but words are
words... and you've really jumped off the deep end.
Petz #3
|
