| Right now that post is 6 pages back, so I'm going to post the pictures and info I recieved from him here. Group buy prices would be this plus shipping. 150 dollars for 10 or more 138 dollars for 20 or more 
(This is from the email he sent me, I think it should answer everything from yesterday) 1....Delivery time for such a large order would be to allow up to at least 30 days.
2....There is no need to damage or modify the dash.
3....The wiring goes through the TOP vent in the centre consul.
4....The Unit is fixed to the dash by "Sikaflex" (or equivalent) which is a soft drying adhesive that does not damage the dash on removal.
5....The gauges do not touch the dash if fitted correctly.
6....There are only the 52mm holes available at this time. To accommodate 60mm holes the unit will have to be re designed in a larger format. We can make one but we need the numbers to warrant it. We have not had very many requests for 60mm holes at all.
7....We will take some photos of the LHD unit on one of our RHD dashes and send it to you.
7....In the meantime attached are some larger photos of our RHD units. These units are fitted to my personal Zed and my wife's personal Zed.
NB - the one fitted to my Zed (including the gauges) is the 3rd Prototype. It is exactly the same fibreglass base unit with a different fascia to the final product you see on Karen's car.
8....The units can be ordered either with or without stitching, and also with coloured stitching if desired, say red or blue or yellow etc., Personally everything looks good to me, except the whole "Zed" thing. :P As it says, he will send me a picture of the LHD version asap. And to Collegeboy, I'm guessing if we could drum up enough buyers for a 60mm version, he would be willing to make it. Here is a link to my previous post if you missed it from yesterday.
La-Z-Link
 |
Posted Yesterday about a 3 gauge dash housing GB. - 
