| Lenses are 2.5-2.6" and interchangeable with any other 2.5" projector. (ie. S2000, TSX, A4, A6, SC430,...) Here is a picture of 300zx clear projector lense with SC430 projector, very sharp cutoff with a nice band of color: 
Overall Diameter=Dt, Curved Diameter=Dc(dia. of the curved part of the lens, without the flat edge), Center Thickness=Tc, Edge Thickness-Te. No focal lengths, sorry. Stanley Low Beam (Honda S2000)
Dt=66.00mm
Dc=62.54mm
Tc=24.60mm
Te=3.54mm Koito Low Beam (90-96 Nissan 300ZX)
Dt=65.00mm
Dc=65.00mm (same)
Tc=23.50mm
Te=1.75mm Stanley Low Beam (Lexus SC430)
Dt=66.30mm
Dc=62.60mm
Tc=24.60mm
Te=3.60mm
f(appx)=50-52mm
Bi-xenon projectors typically have 3-inch lenses and may not fit through projector bezel of the 300zx headlamp.
Projector dimensions are as follows:
Hella 2nd Gen Bi-Xenon (aka E55):
Diameter = 79.80mm
Height = 96.95mm
Width = 106.15mm
Length = 163.35mm
Length(seat of the lens to possible mounting holes) = 58.80mm
Length(possible mounting holes to end of bulb) = 83.90mm
Width(between top mounting holes) = 77.25mm
Width(between bottom mounting holes) = 93.25mm
Height(between mounting holes) = 58.90mm
Stanley Bi-Xenon (aka TL):
Diameter = 80.25mm
Height = 95.95mm
Height(with solenoid) = 117.15mm
Width = 111.60mm
Length = 171.85mm
Length(seat of the lens to mounting holes) = 56.90mm
Length(seat of the lens to end of solenoid) = 89.25mm
Length(mounting holes to end of bulb) = 95.80mm
Width(between top mounting holes) = 82.55mm
Width(between bottom mounting holes) = 90.85mm
Height(between mounting holes) = 71.40mm
Bosch Bi-Xenon (aka E46):
Diameter = 78.30mm
Height = 84.10mm
Width = 105.00mm
Length = 166.95mm
Length(seat of the lens to mounting holes) = 66.65mm
Length(mounting holes to end of bulb) = 80.70mm
Width(between top mounting holes) = 82.00mm
Width(between bottom mounting holes) = 95.10mm
Height(between mounting holes) = 62.10mm Valeo Bi-Xenon D1S:
Diameter = 82.55mm
Height = 96.00mm
Width = 106.20mm
Solenoid(sticks out by) = 9.40mm
Solenoid Length(from mounting holes) = 69.05
Length = 156.20mm
Length(seat of the lens to mounting holes) = 49.45mm
Length(mounting holes to end of bulb w/D2S) = 84.25mm
Width(between top mounting holes) = 72.20mm
Width(between bottom mounting holes) = 70.95mm
Height(between mounting holes) = 78.20mm
Hella Low Beam Only (from pre-2002 Audi A6):
Diameter = 71.90mm
Height = 103.65mm
Width = 110.55mm
Length = 159.00mm
Length(seat of the lens to mounting holes) = 55.40mm
Length(mounting holes to end of bulb) = 84.45mm
Width(between top mounting holes) = 67.85mm
Width(between bottom mounting holes) = 82.35mm
Height(between mounting holes) = 87.95mm
Stanley Low Beam (from Acura TSX):
Diameter = 71.05mm
Height = 85.30mm
Width = 120.80mm
Length = 156.45mm
Length(seat of the lens to mounting holes) = 42.00mm
Length(mounting holes to end of bulb) = 96.95mm
Width(between top mounting holes) = 100.45mm
Width(between bottom mounting holes) = 103.45mm
Height(between mounting holes) = 41.50mm Infinity FX35/45 Bi-Xenon (aka FX):
Diameter = 69.20mm
Height = 105.10mm
Width = 111.80mm
Length = 150.70mm
Length(seat of the lens to mounting holes) = 54.60mm
Length(mounting holes to end of bulb) = 72.10mm
Mounting hole distances are not measured beacuse most people
would make their own and cut-off stock brackets Audi A4 Valeo DOT D2S Projector:
Height = 85.00mm
Width = 100.00mm
Length = 150.00mm
Length(seat of the lens to mounting holes) = 60.00mm
Width(between mounting holes) = 60.00mm
Height(between mounting holes) = 72.00mm
91 TT
02 CBR954RR Who cares if its free? If they give you a free didlo that doesnt mean you shove it up your ass! --- NIXIT @ Rib Crib Sept. 2003 Please step away form the car... You're blocking the view. --- Tu (in reference to ugly hood ornaments)
|
