Subject	Are the tires spinning when you shift into 2nd? If you
Posted by	Scotts94z32 on January 06, 2006 at 11:32 AM
	This message has been viewed 27 times.
In Reply To	Spool up Question posted by Perm on January 06, 2006 at 10:59 AM
Message	"hit it hard" in 1st, does that mean you are running up to 6000RPM or so? If so, when you shift into 2nd, it should put you over 4000RPM, and there should be instant boost. That is, unless you bought upgraded turbos from Ebay that are stock size with huge wheels. SS ____________________________________________________ 2-19... always remember 2-19...
Follow Ups	Spool up Question - Perm 10:59:38 01/06/06 Fill out your profile. The easiest way to reduce lag is - Seafordguy 11:03:48 01/06/06 what rpm do you shift at? - JaffaUK 11:14:42 01/06/06 Are the tires spinning when you shift into 2nd? If you - Scotts94z32 11:32:53 01/06/06 lol. - Kenny 11:40:39 01/06/06 I just heard this was a REAL method of shifitng yesterday > - my91z 12:10:39 01/06/06 "speed shifting". Dad used to do it on the '61 Vette - Guapo 12:17:43 01/06/06 I used to do it in my NA =X. (n/m) - Kenny 12:19:57 01/06/06 I used to do it on my 2 stroke street bikes back in England> - my91z 12:37:43 01/06/06 Kenny, won't that shifting method wear out the clutch faster (n/m) - HensleyZChic 13:41:28 01/06/06 heheh...... - CrazyGreek 13:49:22 01/06/06 Not that I'm critisizing that method, just expensive - HensleyZChic 14:00:21 01/06/06 =) (n/m) - CrazyGreek 18:18:45 01/06/06 That shifting method will wear out everything faster. (n/m) - Kenny 14:57:13 01/06/06 check for boost leaks first... (n/m) - joker_20_02 (Rebuilding) 11:48:57 01/06/06 Re: Spool up Question - Perm 12:16:09 01/06/06 here is a link - SactoTodd 12:40:28 01/06/06 Yes check for boost leaks but before that. - BigTDogg (MA) 12:42:47 01/06/06 Ok I will check for boost leaks 1`st - Perm 13:48:13 01/06/06 Yes, you will need a tester, and use one of the boost test - BigTDogg (MA) 14:21:29 01/06/06 Well I need to look in to That I'm - Perm 15:16:42 01/06/06 Simple gear ratio math (found in the FAQ section under - BigTDogg (MA) 15:46:02 01/06/06 Re: Spool up Question - eriksu9 14:21:13 01/06/06 Re: Spool up Question - eriksu9 14:33:32 01/06/06
Post a Followup	You cannot reply to this message because you are not logged in.