| just about anyways. Don't forget to unhook the harness from the passenger side inner fender. disconnect all the clips. Remove
-exhaust, test pipes
-driveshaft
-starter
-all bell housing bolts
-shifter lever linkage pull back a few inches , then come down Reinstall is reversed -dont forget the GROUND loop reinstall on the bell housing bolt. (top right bolt if looking at rear of engine)
 NO, This picture is not photoshopped. It took many times to take this picture. Setting up the timer, shutter speed etc, then jumping on my bike and getting the tire to spin. 
AIM:Shawn300zxTT "-Any closeups on the nuts? - zboost(tx) 19:17:53 08/08/05
-Not really something you want to ask another man about... (n/m) - LordZ 19:24:00 08/08/05" "I just took 45 min and scrubbed the heck out of my rear"
teambushido(San Diego, CA) 19:24:51 12/11/04 1991 Stage _ TT 5spd (Turbo Upgrade in process)
1990 2+2 Na Stage 3 Auto
11 Sec Eagle Talon Tsi AWD, Daily Driver.
2004 Honda CBR 600RR (Candy blue) |
