Subject	If you are sure it's the turbos, I'd contact JWT and
Posted by	SirpriZ on November 10, 2005 at 6:44 PM
	This message has been viewed 39 times.
In Reply To	Help! posted by Beach88 on November 10, 2005 at 06:15 PM
Message	purchase a new CHRA. They may not have any available and can make a recommendation to a local (to them) turbo shop that puts together new Garrett CHRAs (That's the new bearing section with both the turbine and compressor wheels). So all you do, is bolt your compressor and exhaust housings back on, make sure the turbos are clocked correctly, and each wastegate opens at the same pressure (you can use your old wastegates or buy the adjustable ones from JWT). And I believe you are correct, they do not have an ECU for a 1996 auto. Have you contacted Ash, and see if he does...that opens up the door for upgraded turbos. Good luck, Mark
Follow Ups	Help! - Beach88 18:15:47 11/10/05 If you are sure it's the turbos, I'd contact JWT and - SirpriZ 18:44:50 11/10/05 Check the nut that holds the egr tube in. I have seen it - mpbond(STL) 19:39:01 11/10/05 Thanks fellows! - Beach88 20:09:26 11/10/05 cross your fingers, heheh - Zrevolver 20:19:37 11/10/05
Post a Followup	You cannot reply to this message because you are not logged in.